======================================
| # 109.08 [+0.00] [ 1115.036563] Mirror/redirect action on
| # 109.08 [+0.00] [ 1121.829127] tc (10990) used greatest stack depth: 23648 bytes left
| # 109.09 [+0.00] [ 1127.983509] tc (11074) used greatest stack depth: 23568 bytes left
| # 109.10 [+0.01] [ 1154.405104] irq 51: nobody cared (try booting with the "irqpoll" option)
# 109.11 [+0.00] [ 1154.405697] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
# 109.11 [+0.00] [ 1154.405703] Call Trace:
# 109.11 [+0.00] [ 1154.405706]  <IRQ>
# 109.11 [+0.00] [ 1154.405708]  dump_stack_lvl (lib/dump_stack.c:123)
# 109.11 [+0.00] [ 1154.405724]  __report_bad_irq (kernel/irq/spurious.c:170)
# 109.11 [+0.00] [ 1154.405733]  note_interrupt (kernel/irq/spurious.c:372)
# 109.12 [+0.00] [ 1154.405741]  handle_irq_event (kernel/irq/handle.c:245 kernel/irq/handle.c:257)
# 109.12 [+0.00] [ 1154.405747]  handle_edge_irq (kernel/irq/chip.c:857)
# 109.12 [+0.00] [ 1154.405758]  __common_interrupt (./include/asm-generic/irq_regs.h:28 arch/x86/kernel/irq.c:328)
# 109.12 [+0.00] [ 1154.405769]  common_interrupt (arch/x86/kernel/irq.c:318 (discriminator 14))
# 109.12 [+0.00] [ 1154.405774]  </IRQ>
# 109.12 [+0.00] [ 1154.405775]  <TASK>
# 109.12 [+0.00] [ 1154.405779]  asm_common_interrupt (./arch/x86/include/asm/idtentry.h:688)
# 109.13 [+0.00] [ 1154.405784] RIP: 0010:_raw_spin_unlock_irqrestore (./include/linux/spinlock_api_smp.h:152 kernel/locking/spinlock.c:194)
# 109.13 [+0.00] [ 1154.405792] Code: 74 24 10 e8 51 1a ff fd 48 89 ef e8 79 69 ff fd 81 e3 00 02 00 00 75 25 9c 58 f6 c4 02 75 2d 48 85 db 74 01 fb bf 01 00 00 00 <e8> 0a a2 f3 fd 65 8b 05 b3 7b 07 02 85 c0 74 0a 5b 5d c3 e8 87 2e
All code
========
   0:	74 24                	je     0x26
   2:	10 e8                	adc    %ch,%al
   4:	51                   	push   %rcx
   5:	1a ff                	sbb    %bh,%bh
   7:	fd                   	std
   8:	48 89 ef             	mov    %rbp,%rdi
   b:	e8 79 69 ff fd       	call   0xfffffffffdff6989
  10:	81 e3 00 02 00 00    	and    $0x200,%ebx
  16:	75 25                	jne    0x3d
  18:	9c                   	pushf
  19:	58                   	pop    %rax
  1a:	f6 c4 02             	test   $0x2,%ah
  1d:	75 2d                	jne    0x4c
  1f:	48 85 db             	test   %rbx,%rbx
  22:	74 01                	je     0x25
  24:	fb                   	sti
  25:	bf 01 00 00 00       	mov    $0x1,%edi
  2a:*	e8 0a a2 f3 fd       	call   0xfffffffffdf3a239		<-- trapping instruction
  2f:	65 8b 05 b3 7b 07 02 	mov    %gs:0x2077bb3(%rip),%eax        # 0x2077be9
  36:	85 c0                	test   %eax,%eax
  38:	74 0a                	je     0x44
  3a:	5b                   	pop    %rbx
  3b:	5d                   	pop    %rbp
  3c:	c3                   	ret
  3d:	e8                   	.byte 0xe8
  3e:	87 2e                	xchg   %ebp,(%rsi)

Code starting with the faulting instruction
===========================================
   0:	e8 0a a2 f3 fd       	call   0xfffffffffdf3a20f
   5:	65 8b 05 b3 7b 07 02 	mov    %gs:0x2077bb3(%rip),%eax        # 0x2077bbf
   c:	85 c0                	test   %eax,%eax
   e:	74 0a                	je     0x1a
  10:	5b                   	pop    %rbx
  11:	5d                   	pop    %rbp
  12:	c3                   	ret
  13:	e8                   	.byte 0xe8
  14:	87 2e                	xchg   %ebp,(%rsi)
# 109.14 [+0.01] [ 1154.405795] RSP: 0018:ffffc900010a7a88 EFLAGS: 00000206
# 109.14 [+0.00] [ 1154.405799] RAX: 0000000000000006 RBX: 0000000000000200 RCX: 0000000000000040
# 109.14 [+0.00] [ 1154.405801] RDX: 0000000000000000 RSI: ffffffff8bf86a21 RDI: 0000000000000001
# 109.14 [+0.00] [ 1154.405803] RBP: ffffffff8e86e560 R08: 0000000000000001 R09: 0000000000000001
# 109.15 [+0.00] [ 1154.405805] R10: ffffffff8ce24257 R11: ffff888005888970 R12: 00000000ffffffff
# 109.15 [+0.00] [ 1154.405807] R13: 0000000000000001 R14: ffffffff8e86e668 R15: 00000000ffffffff
# 109.15 [+0.00] [ 1154.405824]  uart_write (drivers/tty/serial/serial_core.c:74 drivers/tty/serial/serial_core.c:92 drivers/tty/serial/serial_core.c:88 drivers/tty/serial/serial_core.c:634)
# 109.15 [+0.00] [ 1154.405835]  process_output_block (drivers/tty/n_tty.c:561)
# 109.16 [+0.00] [ 1154.405844]  ? _raw_spin_unlock_irqrestore (./include/linux/spinlock_api_smp.h:151 kernel/locking/spinlock.c:194)
# 109.16 [+0.00] [ 1154.405851]  n_tty_write (drivers/tty/n_tty.c:2378)
# 109.16 [+0.00] [ 1154.405854]  ? _copy_from_iter (./arch/x86/include/asm/uaccess_64.h:126 ./arch/x86/include/asm/uaccess_64.h:141 lib/iov_iter.c:55 ./include/linux/iov_iter.h:30 ./include/linux/iov_iter.h:302 ./include/linux/iov_iter.h:330 lib/iov_iter.c:249 lib/iov_iter.c:260)
# 109.16 [+0.00] [ 1154.405867]  ? n_tty_receive_signal_char (drivers/tty/n_tty.c:2348)
# 109.16 [+0.00] [ 1154.405873]  ? __init_waitqueue_head (kernel/sched/wait.c:458)
# 109.17 [+0.00] [ 1154.405882]  ? lock_acquire (./include/trace/events/lock.h:24 kernel/locking/lockdep.c:5831)
# 109.17 [+0.00] [ 1154.405887]  ? iterate_tty_write (drivers/tty/tty_io.c:939 drivers/tty/tty_io.c:958)
# 109.17 [+0.00] [ 1154.405897]  iterate_tty_write (drivers/tty/tty_io.c:1007)
# 109.17 [+0.00] [ 1154.405904]  ? tty_ldisc_ref_wait (drivers/tty/tty_ldisc.c:244)
# 109.17 [+0.00] [ 1154.405912]  file_tty_write.constprop.0 (drivers/tty/tty_io.c:1081)
# 109.17 [+0.00] [ 1154.405919]  vfs_write (fs/read_write.c:594 fs/read_write.c:686)
# 109.18 [+0.00] [ 1154.405927]  ? find_held_lock (kernel/locking/lockdep.c:5350)
# 109.18 [+0.00] [ 1154.405931]  ? kernel_write (fs/read_write.c:667)
# 109.18 [+0.00] [ 1154.405939]  ? clockevents_program_event (kernel/time/clockevents.c:326)
# 109.20 [+0.02] [ 1154.405953]  ? clockevents_program_event (kernel/time/clockevents.c:336 (discriminator 3))
# 109.20 [+0.00] [ 1154.405961]  ksys_write (fs/read_write.c:738)
# 109.20 [+0.00] [ 1154.405966]  ? __ia32_sys_read (fs/read_write.c:728)
# 109.20 [+0.00] [ 1154.405977]  do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94)
# 109.21 [+0.00] [ 1154.405985]  entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
# 109.21 [+0.00] [ 1154.405988] RIP: 0033:0x7f7700b64257
# 109.21 [+0.00] [ 1154.405993] Code: 0f 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24
All code
========
   0:	0f 00                	(bad)
   2:	f7 d8                	neg    %eax
   4:	64 89 02             	mov    %eax,%fs:(%rdx)
   7:	48 c7 c0 ff ff ff ff 	mov    $0xffffffffffffffff,%rax
   e:	eb b7                	jmp    0xffffffffffffffc7
  10:	0f 1f 00             	nopl   (%rax)
  13:	f3 0f 1e fa          	endbr64
  17:	64 8b 04 25 18 00 00 	mov    %fs:0x18,%eax
  1e:	00 
  1f:	85 c0                	test   %eax,%eax
  21:	75 10                	jne    0x33
  23:	b8 01 00 00 00       	mov    $0x1,%eax
  28:	0f 05                	syscall
  2a:*	48 3d 00 f0 ff ff    	cmp    $0xfffffffffffff000,%rax		<-- trapping instruction
  30:	77 51                	ja     0x83
  32:	c3                   	ret
  33:	48 83 ec 28          	sub    $0x28,%rsp
  37:	48 89 54 24 18       	mov    %rdx,0x18(%rsp)
  3c:	48                   	rex.W
  3d:	89                   	.byte 0x89
  3e:	74 24                	je     0x64

Code starting with the faulting instruction
===========================================
   0:	48 3d 00 f0 ff ff    	cmp    $0xfffffffffffff000,%rax
   6:	77 51                	ja     0x59
   8:	c3                   	ret
   9:	48 83 ec 28          	sub    $0x28,%rsp
   d:	48 89 54 24 18       	mov    %rdx,0x18(%rsp)
  12:	48                   	rex.W
  13:	89                   	.byte 0x89
  14:	74 24                	je     0x3a
# 109.22 [+0.01] [ 1154.405995] RSP: 002b:00007fff99d5b9f8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
# 109.22 [+0.00] [ 1154.405999] RAX: ffffffffffffffda RBX: 00005608e79ea2e0 RCX: 00007f7700b64257
# 109.22 [+0.00] [ 1154.406000] RDX: 0000000000000001 RSI: 00005608e79ea2e0 RDI: 0000000000000001
# 109.22 [+0.00] [ 1154.406002] RBP: 0000000000000001 R08: 0000000000000000 R09: 0000000000002000
# 109.23 [+0.00] [ 1154.406004] R10: 0000000000000001 R11: 0000000000000246 R12: 00005608e79d5600
# 109.23 [+0.00] [ 1154.406005] R13: 00005608e79b62a0 R14: 0000000000000001 R15: 00005608e79d5600
| xx__-> [ 1115.036563][T10879] Mirror/redirect action on
| [ 1121.829127][T10990] tc (10990) used greatest stack depth: 23648 bytes left
| [ 1127.983509][T11074] tc (11074) used greatest stack depth: 23568 bytes left
| [ 1154.405104][    C0] irq 51: nobody cared (try booting with the "irqpoll" option)
[ 1154.405697][    C0] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[ 1154.405703][    C0] Call Trace:
[ 1154.405706][    C0]  <IRQ>
[ 1154.405708][    C0]  dump_stack_lvl (lib/dump_stack.c:123)
[ 1154.405724][    C0]  __report_bad_irq (kernel/irq/spurious.c:170)
[ 1154.405733][    C0]  note_interrupt (kernel/irq/spurious.c:372)
[ 1154.405741][    C0]  handle_irq_event (kernel/irq/handle.c:245 kernel/irq/handle.c:257)
[ 1154.405747][    C0]  handle_edge_irq (kernel/irq/chip.c:857)
[ 1154.405758][    C0]  __common_interrupt (./include/asm-generic/irq_regs.h:28 arch/x86/kernel/irq.c:328)
[ 1154.405769][    C0]  common_interrupt (arch/x86/kernel/irq.c:318 (discriminator 14))
[ 1154.405774][    C0]  </IRQ>
[ 1154.405775][    C0]  <TASK>
[ 1154.405779][    C0]  asm_common_interrupt (./arch/x86/include/asm/idtentry.h:688)
[ 1154.405784][    C0] RIP: 0010:_raw_spin_unlock_irqrestore (./include/linux/spinlock_api_smp.h:152 kernel/locking/spinlock.c:194)
[ 1154.405792][    C0] Code: 74 24 10 e8 51 1a ff fd 48 89 ef e8 79 69 ff fd 81 e3 00 02 00 00 75 25 9c 58 f6 c4 02 75 2d 48 85 db 74 01 fb bf 01 00 00 00 <e8> 0a a2 f3 fd 65 8b 05 b3 7b 07 02 85 c0 74 0a 5b 5d c3 e8 87 2e
All code
========
   0:	74 24                	je     0x26
   2:	10 e8                	adc    %ch,%al
   4:	51                   	push   %rcx
   5:	1a ff                	sbb    %bh,%bh
   7:	fd                   	std
   8:	48 89 ef             	mov    %rbp,%rdi
   b:	e8 79 69 ff fd       	call   0xfffffffffdff6989
  10:	81 e3 00 02 00 00    	and    $0x200,%ebx
  16:	75 25                	jne    0x3d
  18:	9c                   	pushf
  19:	58                   	pop    %rax
  1a:	f6 c4 02             	test   $0x2,%ah
  1d:	75 2d                	jne    0x4c
  1f:	48 85 db             	test   %rbx,%rbx
  22:	74 01                	je     0x25
  24:	fb                   	sti
  25:	bf 01 00 00 00       	mov    $0x1,%edi
  2a:*	e8 0a a2 f3 fd       	call   0xfffffffffdf3a239		<-- trapping instruction
  2f:	65 8b 05 b3 7b 07 02 	mov    %gs:0x2077bb3(%rip),%eax        # 0x2077be9
  36:	85 c0                	test   %eax,%eax
  38:	74 0a                	je     0x44
  3a:	5b                   	pop    %rbx
  3b:	5d                   	pop    %rbp
  3c:	c3                   	ret
  3d:	e8                   	.byte 0xe8
  3e:	87 2e                	xchg   %ebp,(%rsi)

Code starting with the faulting instruction
===========================================
   0:	e8 0a a2 f3 fd       	call   0xfffffffffdf3a20f
   5:	65 8b 05 b3 7b 07 02 	mov    %gs:0x2077bb3(%rip),%eax        # 0x2077bbf
   c:	85 c0                	test   %eax,%eax
   e:	74 0a                	je     0x1a
  10:	5b                   	pop    %rbx
  11:	5d                   	pop    %rbp
  12:	c3                   	ret
  13:	e8                   	.byte 0xe8
  14:	87 2e                	xchg   %ebp,(%rsi)
[ 1154.405795][    C0] RSP: 0018:ffffc900010a7a88 EFLAGS: 00000206
[ 1154.405799][    C0] RAX: 0000000000000006 RBX: 0000000000000200 RCX: 0000000000000040
[ 1154.405801][    C0] RDX: 0000000000000000 RSI: ffffffff8bf86a21 RDI: 0000000000000001
[ 1154.405803][    C0] RBP: ffffffff8e86e560 R08: 0000000000000001 R09: 0000000000000001
[ 1154.405805][    C0] R10: ffffffff8ce24257 R11: ffff888005888970 R12: 00000000ffffffff
[ 1154.405807][    C0] R13: 0000000000000001 R14: ffffffff8e86e668 R15: 00000000ffffffff
[ 1154.405824][    C0]  uart_write (drivers/tty/serial/serial_core.c:74 drivers/tty/serial/serial_core.c:92 drivers/tty/serial/serial_core.c:88 drivers/tty/serial/serial_core.c:634)
[ 1154.405835][    C0]  process_output_block (drivers/tty/n_tty.c:561)
[ 1154.405844][    C0]  ? _raw_spin_unlock_irqrestore (./include/linux/spinlock_api_smp.h:151 kernel/locking/spinlock.c:194)
[ 1154.405851][    C0]  n_tty_write (drivers/tty/n_tty.c:2378)
[ 1154.405854][    C0]  ? _copy_from_iter (./arch/x86/include/asm/uaccess_64.h:126 ./arch/x86/include/asm/uaccess_64.h:141 lib/iov_iter.c:55 ./include/linux/iov_iter.h:30 ./include/linux/iov_iter.h:302 ./include/linux/iov_iter.h:330 lib/iov_iter.c:249 lib/iov_iter.c:260)
[ 1154.405867][    C0]  ? n_tty_receive_signal_char (drivers/tty/n_tty.c:2348)
[ 1154.405873][    C0]  ? __init_waitqueue_head (kernel/sched/wait.c:458)
[ 1154.405882][    C0]  ? lock_acquire (./include/trace/events/lock.h:24 kernel/locking/lockdep.c:5831)
[ 1154.405887][    C0]  ? iterate_tty_write (drivers/tty/tty_io.c:939 drivers/tty/tty_io.c:958)
[ 1154.405897][    C0]  iterate_tty_write (drivers/tty/tty_io.c:1007)
[ 1154.405904][    C0]  ? tty_ldisc_ref_wait (drivers/tty/tty_ldisc.c:244)
[ 1154.405912][    C0]  file_tty_write.constprop.0 (drivers/tty/tty_io.c:1081)
[ 1154.405919][    C0]  vfs_write (fs/read_write.c:594 fs/read_write.c:686)
[ 1154.405927][    C0]  ? find_held_lock (kernel/locking/lockdep.c:5350)
[ 1154.405931][    C0]  ? kernel_write (fs/read_write.c:667)
[ 1154.405939][    C0]  ? clockevents_program_event (kernel/time/clockevents.c:326)
[ 1154.405953][    C0]  ? clockevents_program_event (kernel/time/clockevents.c:336 (discriminator 3))
[ 1154.405961][    C0]  ksys_write (fs/read_write.c:738)
[ 1154.405966][    C0]  ? __ia32_sys_read (fs/read_write.c:728)
[ 1154.405977][    C0]  do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94)
[ 1154.405985][    C0]  entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
[ 1154.405988][    C0] RIP: 0033:0x7f7700b64257
[ 1154.405993][    C0] Code: 0f 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24
All code
========
   0:	0f 00                	(bad)
   2:	f7 d8                	neg    %eax
   4:	64 89 02             	mov    %eax,%fs:(%rdx)
   7:	48 c7 c0 ff ff ff ff 	mov    $0xffffffffffffffff,%rax
   e:	eb b7                	jmp    0xffffffffffffffc7
  10:	0f 1f 00             	nopl   (%rax)
  13:	f3 0f 1e fa          	endbr64
  17:	64 8b 04 25 18 00 00 	mov    %fs:0x18,%eax
  1e:	00 
  1f:	85 c0                	test   %eax,%eax
  21:	75 10                	jne    0x33
  23:	b8 01 00 00 00       	mov    $0x1,%eax
  28:	0f 05                	syscall
  2a:*	48 3d 00 f0 ff ff    	cmp    $0xfffffffffffff000,%rax		<-- trapping instruction
  30:	77 51                	ja     0x83
  32:	c3                   	ret
  33:	48 83 ec 28          	sub    $0x28,%rsp
  37:	48 89 54 24 18       	mov    %rdx,0x18(%rsp)
  3c:	48                   	rex.W
  3d:	89                   	.byte 0x89
  3e:	74 24                	je     0x64

Code starting with the faulting instruction
===========================================
   0:	48 3d 00 f0 ff ff    	cmp    $0xfffffffffffff000,%rax
   6:	77 51                	ja     0x59
   8:	c3                   	ret
   9:	48 83 ec 28          	sub    $0x28,%rsp
   d:	48 89 54 24 18       	mov    %rdx,0x18(%rsp)
  12:	48                   	rex.W
  13:	89                   	.byte 0x89
  14:	74 24                	je     0x3a
[ 1154.405995][    C0] RSP: 002b:00007fff99d5b9f8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[ 1154.405999][    C0] RAX: ffffffffffffffda RBX: 00005608e79ea2e0 RCX: 00007f7700b64257
[ 1154.406000][    C0] RDX: 0000000000000001 RSI: 00005608e79ea2e0 RDI: 0000000000000001
[ 1154.406002][    C0] RBP: 0000000000000001 R08: 0000000000000000 R09: 0000000000002000
[ 1154.406004][    C0] R10: 0000000000000001 R11: 0000000000000246 R12: 00005608e79d5600


Finger prints:
__report_bad_irq:note_interrupt:handle_irq_event:handle_edge_irq:__common_interrupt