======================================
| # 106.77 [+0.00] [  903.071288] ip6_tunnel: g2 xmit: Local address not yet configured!
| # 106.77 [+0.00] [  973.026468] clocksource: Long readout interval, skipping watchdog check: cs_nsec: 1001227169 wd_nsec: 1001226773
| # 106.78 [+0.00] [ 1112.972003] Mirror/redirect action on
| # 106.78 [+0.00] [ 1136.736812] irq 51: nobody cared (try booting with the "irqpoll" option)
# 106.78 [+0.00] [ 1136.737473] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
# 106.79 [+0.00] [ 1136.737479] Call Trace:
# 106.79 [+0.00] [ 1136.737483]  <IRQ>
# 106.79 [+0.00] [ 1136.737486]  dump_stack_lvl (lib/dump_stack.c:123)
# 106.79 [+0.00] [ 1136.737522]  __report_bad_irq (kernel/irq/spurious.c:170)
# 106.79 [+0.00] [ 1136.737540]  note_interrupt (kernel/irq/spurious.c:372)
# 106.80 [+0.01] [ 1136.737547]  handle_irq_event (kernel/irq/handle.c:245 kernel/irq/handle.c:257)
# 106.81 [+0.02] [ 1136.737554]  handle_edge_irq (kernel/irq/chip.c:857)
# 106.81 [+0.00] [ 1136.737566]  __common_interrupt (./include/asm-generic/irq_regs.h:28 arch/x86/kernel/irq.c:328)
# 106.82 [+0.00] [ 1136.737584]  common_interrupt (arch/x86/kernel/irq.c:318 (discriminator 14))
# 106.82 [+0.00] [ 1136.737591]  </IRQ>
# 106.82 [+0.00] [ 1136.737592]  <TASK>
# 106.82 [+0.00] [ 1136.737596]  asm_common_interrupt (./arch/x86/include/asm/idtentry.h:688)
# 106.82 [+0.00] [ 1136.737604] RIP: 0010:_raw_spin_unlock_irqrestore (./include/linux/spinlock_api_smp.h:152 kernel/locking/spinlock.c:194)
# 106.82 [+0.00] [ 1136.737622] Code: 74 24 10 e8 e1 48 ff fd 48 89 ef e8 09 98 ff fd 81 e3 00 02 00 00 75 25 9c 58 f6 c4 02 75 2d 48 85 db 74 01 fb bf 01 00 00 00 <e8> 9a d0 f3 fd 65 8b 05 b3 cb 07 02 85 c0 74 0a 5b 5d c3 e8 97 5b
All code
========
   0:	74 24                	je     0x26
   2:	10 e8                	adc    %ch,%al
   4:	e1 48                	loope  0x4e
   6:	ff                   	(bad)
   7:	fd                   	std
   8:	48 89 ef             	mov    %rbp,%rdi
   b:	e8 09 98 ff fd       	call   0xfffffffffdff9819
  10:	81 e3 00 02 00 00    	and    $0x200,%ebx
  16:	75 25                	jne    0x3d
  18:	9c                   	pushf
  19:	58                   	pop    %rax
  1a:	f6 c4 02             	test   $0x2,%ah
  1d:	75 2d                	jne    0x4c
  1f:	48 85 db             	test   %rbx,%rbx
  22:	74 01                	je     0x25
  24:	fb                   	sti
  25:	bf 01 00 00 00       	mov    $0x1,%edi
  2a:*	e8 9a d0 f3 fd       	call   0xfffffffffdf3d0c9		<-- trapping instruction
  2f:	65 8b 05 b3 cb 07 02 	mov    %gs:0x207cbb3(%rip),%eax        # 0x207cbe9
  36:	85 c0                	test   %eax,%eax
  38:	74 0a                	je     0x44
  3a:	5b                   	pop    %rbx
  3b:	5d                   	pop    %rbp
  3c:	c3                   	ret
  3d:	e8                   	.byte 0xe8
  3e:	97                   	xchg   %eax,%edi
  3f:	5b                   	pop    %rbx

Code starting with the faulting instruction
===========================================
   0:	e8 9a d0 f3 fd       	call   0xfffffffffdf3d09f
   5:	65 8b 05 b3 cb 07 02 	mov    %gs:0x207cbb3(%rip),%eax        # 0x207cbbf
   c:	85 c0                	test   %eax,%eax
   e:	74 0a                	je     0x1a
  10:	5b                   	pop    %rbx
  11:	5d                   	pop    %rbp
  12:	c3                   	ret
  13:	e8                   	.byte 0xe8
  14:	97                   	xchg   %eax,%edi
  15:	5b                   	pop    %rbx
# 106.83 [+0.01] [ 1136.737625] RSP: 0018:ffffc90001207a88 EFLAGS: 00000206
# 106.83 [+0.00] [ 1136.737632] RAX: 0000000000000006 RBX: 0000000000000200 RCX: 0000000000000040
# 106.84 [+0.00] [ 1136.737634] RDX: 0000000000000000 RSI: ffffffffa45868bb RDI: 0000000000000001
# 106.84 [+0.00] [ 1136.737636] RBP: ffffffffa6e6e560 R08: 0000000000000001 R09: 0000000000000001
# 106.84 [+0.00] [ 1136.737638] R10: ffffffffa5423e57 R11: ffff888006060970 R12: 00000000ffffffff
# 106.84 [+0.00] [ 1136.737640] R13: 0000000000000001 R14: ffffffffa6e6e668 R15: 00000000ffffffff
# 106.85 [+0.00] [ 1136.737657]  uart_write (drivers/tty/serial/serial_core.c:74 drivers/tty/serial/serial_core.c:92 drivers/tty/serial/serial_core.c:88 drivers/tty/serial/serial_core.c:634)
# 106.85 [+0.00] [ 1136.737676]  process_output_block (drivers/tty/n_tty.c:561)
# 106.85 [+0.00] [ 1136.737689]  ? _raw_spin_unlock_irqrestore (./include/linux/spinlock_api_smp.h:151 kernel/locking/spinlock.c:194)
# 106.85 [+0.00] [ 1136.737696]  n_tty_write (drivers/tty/n_tty.c:2378)
# 106.85 [+0.00] [ 1136.737699]  ? _copy_from_iter (./arch/x86/include/asm/uaccess_64.h:126 ./arch/x86/include/asm/uaccess_64.h:141 lib/iov_iter.c:55 ./include/linux/iov_iter.h:30 ./include/linux/iov_iter.h:302 ./include/linux/iov_iter.h:330 lib/iov_iter.c:249 lib/iov_iter.c:260)
# 106.86 [+0.00] [ 1136.737718]  ? n_tty_receive_signal_char (drivers/tty/n_tty.c:2348)
# 106.86 [+0.00] [ 1136.737724]  ? __init_waitqueue_head (kernel/sched/wait.c:458)
# 106.86 [+0.00] [ 1136.737735]  ? lock_acquire (./include/trace/events/lock.h:24 kernel/locking/lockdep.c:5831)
# 106.86 [+0.00] [ 1136.737742]  ? iterate_tty_write (drivers/tty/tty_io.c:939 drivers/tty/tty_io.c:958)
# 106.86 [+0.00] [ 1136.737752]  iterate_tty_write (drivers/tty/tty_io.c:1007)
# 106.86 [+0.00] [ 1136.737759]  ? tty_ldisc_ref_wait (drivers/tty/tty_ldisc.c:244)
# 106.87 [+0.00] [ 1136.737767]  file_tty_write.constprop.0 (drivers/tty/tty_io.c:1081)
# 106.87 [+0.00] [ 1136.737774]  vfs_write (fs/read_write.c:594 fs/read_write.c:686)
# 106.87 [+0.00] [ 1136.737788]  ? find_held_lock (kernel/locking/lockdep.c:5350)
# 106.87 [+0.00] [ 1136.737792]  ? kernel_write (fs/read_write.c:667)
# 106.87 [+0.00] [ 1136.737800]  ? clockevents_program_event (kernel/time/clockevents.c:326)
# 106.88 [+0.00] [ 1136.737817]  ? clockevents_program_event (kernel/time/clockevents.c:336 (discriminator 3))
# 106.88 [+0.00] [ 1136.737825]  ksys_write (fs/read_write.c:738)
# 106.88 [+0.00] [ 1136.737830]  ? __ia32_sys_read (fs/read_write.c:728)
# 106.88 [+0.00] [ 1136.737842]  do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94)
# 106.88 [+0.00] [ 1136.737849]  entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
# 106.88 [+0.00] [ 1136.737852] RIP: 0033:0x7fbb344f4257
# 106.89 [+0.00] [ 1136.737857] Code: 0f 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24
All code
========
   0:	0f 00                	(bad)
   2:	f7 d8                	neg    %eax
   4:	64 89 02             	mov    %eax,%fs:(%rdx)
   7:	48 c7 c0 ff ff ff ff 	mov    $0xffffffffffffffff,%rax
   e:	eb b7                	jmp    0xffffffffffffffc7
  10:	0f 1f 00             	nopl   (%rax)
  13:	f3 0f 1e fa          	endbr64
  17:	64 8b 04 25 18 00 00 	mov    %fs:0x18,%eax
  1e:	00 
  1f:	85 c0                	test   %eax,%eax
  21:	75 10                	jne    0x33
  23:	b8 01 00 00 00       	mov    $0x1,%eax
  28:	0f 05                	syscall
  2a:*	48 3d 00 f0 ff ff    	cmp    $0xfffffffffffff000,%rax		<-- trapping instruction
  30:	77 51                	ja     0x83
  32:	c3                   	ret
  33:	48 83 ec 28          	sub    $0x28,%rsp
  37:	48 89 54 24 18       	mov    %rdx,0x18(%rsp)
  3c:	48                   	rex.W
  3d:	89                   	.byte 0x89
  3e:	74 24                	je     0x64

Code starting with the faulting instruction
===========================================
   0:	48 3d 00 f0 ff ff    	cmp    $0xfffffffffffff000,%rax
   6:	77 51                	ja     0x59
   8:	c3                   	ret
   9:	48 83 ec 28          	sub    $0x28,%rsp
   d:	48 89 54 24 18       	mov    %rdx,0x18(%rsp)
  12:	48                   	rex.W
  13:	89                   	.byte 0x89
  14:	74 24                	je     0x3a
# 106.90 [+0.01] [ 1136.737860] RSP: 002b:00007ffd2cdc87b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
# 106.90 [+0.01] [ 1136.737863] RAX: ffffffffffffffda RBX: 000055bc8686f2e0 RCX: 00007fbb344f4257
# 106.91 [+0.00] [ 1136.737865] RDX: 0000000000000001 RSI: 000055bc8686f2e0 RDI: 0000000000000001
# 106.91 [+0.00] [ 1136.737866] RBP: 0000000000000001 R08: 0000000000000000 R09: 0000000000002000
# 106.91 [+0.00] [ 1136.737868] R10: 0000000000000001 R11: 0000000000000246 R12: 000055bc8685a600
# 106.92 [+0.00] [ 1136.737869] R13: 000055bc8683b2a0 R14: 0000000000000001 R15: 000055bc8685a600
| xx__-> echo $?
| 0
| xx__-> [ 1112.972003][T10878] Mirror/redirect action on
| [ 1136.736812][    C0] irq 51: nobody cared (try booting with the "irqpoll" option)
[ 1136.737473][    C0] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[ 1136.737479][    C0] Call Trace:
[ 1136.737483][    C0]  <IRQ>
[ 1136.737486][    C0]  dump_stack_lvl (lib/dump_stack.c:123)
[ 1136.737522][    C0]  __report_bad_irq (kernel/irq/spurious.c:170)
[ 1136.737540][    C0]  note_interrupt (kernel/irq/spurious.c:372)
[ 1136.737547][    C0]  handle_irq_event (kernel/irq/handle.c:245 kernel/irq/handle.c:257)
[ 1136.737554][    C0]  handle_edge_irq (kernel/irq/chip.c:857)
[ 1136.737566][    C0]  __common_interrupt (./include/asm-generic/irq_regs.h:28 arch/x86/kernel/irq.c:328)
[ 1136.737584][    C0]  common_interrupt (arch/x86/kernel/irq.c:318 (discriminator 14))
[ 1136.737591][    C0]  </IRQ>
[ 1136.737592][    C0]  <TASK>
[ 1136.737596][    C0]  asm_common_interrupt (./arch/x86/include/asm/idtentry.h:688)
[ 1136.737604][    C0] RIP: 0010:_raw_spin_unlock_irqrestore (./include/linux/spinlock_api_smp.h:152 kernel/locking/spinlock.c:194)
[ 1136.737622][    C0] Code: 74 24 10 e8 e1 48 ff fd 48 89 ef e8 09 98 ff fd 81 e3 00 02 00 00 75 25 9c 58 f6 c4 02 75 2d 48 85 db 74 01 fb bf 01 00 00 00 <e8> 9a d0 f3 fd 65 8b 05 b3 cb 07 02 85 c0 74 0a 5b 5d c3 e8 97 5b
All code
========
   0:	74 24                	je     0x26
   2:	10 e8                	adc    %ch,%al
   4:	e1 48                	loope  0x4e
   6:	ff                   	(bad)
   7:	fd                   	std
   8:	48 89 ef             	mov    %rbp,%rdi
   b:	e8 09 98 ff fd       	call   0xfffffffffdff9819
  10:	81 e3 00 02 00 00    	and    $0x200,%ebx
  16:	75 25                	jne    0x3d
  18:	9c                   	pushf
  19:	58                   	pop    %rax
  1a:	f6 c4 02             	test   $0x2,%ah
  1d:	75 2d                	jne    0x4c
  1f:	48 85 db             	test   %rbx,%rbx
  22:	74 01                	je     0x25
  24:	fb                   	sti
  25:	bf 01 00 00 00       	mov    $0x1,%edi
  2a:*	e8 9a d0 f3 fd       	call   0xfffffffffdf3d0c9		<-- trapping instruction
  2f:	65 8b 05 b3 cb 07 02 	mov    %gs:0x207cbb3(%rip),%eax        # 0x207cbe9
  36:	85 c0                	test   %eax,%eax
  38:	74 0a                	je     0x44
  3a:	5b                   	pop    %rbx
  3b:	5d                   	pop    %rbp
  3c:	c3                   	ret
  3d:	e8                   	.byte 0xe8
  3e:	97                   	xchg   %eax,%edi
  3f:	5b                   	pop    %rbx

Code starting with the faulting instruction
===========================================
   0:	e8 9a d0 f3 fd       	call   0xfffffffffdf3d09f
   5:	65 8b 05 b3 cb 07 02 	mov    %gs:0x207cbb3(%rip),%eax        # 0x207cbbf
   c:	85 c0                	test   %eax,%eax
   e:	74 0a                	je     0x1a
  10:	5b                   	pop    %rbx
  11:	5d                   	pop    %rbp
  12:	c3                   	ret
  13:	e8                   	.byte 0xe8
  14:	97                   	xchg   %eax,%edi
  15:	5b                   	pop    %rbx
[ 1136.737625][    C0] RSP: 0018:ffffc90001207a88 EFLAGS: 00000206
[ 1136.737632][    C0] RAX: 0000000000000006 RBX: 0000000000000200 RCX: 0000000000000040
[ 1136.737634][    C0] RDX: 0000000000000000 RSI: ffffffffa45868bb RDI: 0000000000000001
[ 1136.737636][    C0] RBP: ffffffffa6e6e560 R08: 0000000000000001 R09: 0000000000000001
[ 1136.737638][    C0] R10: ffffffffa5423e57 R11: ffff888006060970 R12: 00000000ffffffff
[ 1136.737640][    C0] R13: 0000000000000001 R14: ffffffffa6e6e668 R15: 00000000ffffffff
[ 1136.737657][    C0]  uart_write (drivers/tty/serial/serial_core.c:74 drivers/tty/serial/serial_core.c:92 drivers/tty/serial/serial_core.c:88 drivers/tty/serial/serial_core.c:634)
[ 1136.737676][    C0]  process_output_block (drivers/tty/n_tty.c:561)
[ 1136.737689][    C0]  ? _raw_spin_unlock_irqrestore (./include/linux/spinlock_api_smp.h:151 kernel/locking/spinlock.c:194)
[ 1136.737696][    C0]  n_tty_write (drivers/tty/n_tty.c:2378)
[ 1136.737699][    C0]  ? _copy_from_iter (./arch/x86/include/asm/uaccess_64.h:126 ./arch/x86/include/asm/uaccess_64.h:141 lib/iov_iter.c:55 ./include/linux/iov_iter.h:30 ./include/linux/iov_iter.h:302 ./include/linux/iov_iter.h:330 lib/iov_iter.c:249 lib/iov_iter.c:260)
[ 1136.737718][    C0]  ? n_tty_receive_signal_char (drivers/tty/n_tty.c:2348)
[ 1136.737724][    C0]  ? __init_waitqueue_head (kernel/sched/wait.c:458)
[ 1136.737735][    C0]  ? lock_acquire (./include/trace/events/lock.h:24 kernel/locking/lockdep.c:5831)
[ 1136.737742][    C0]  ? iterate_tty_write (drivers/tty/tty_io.c:939 drivers/tty/tty_io.c:958)
[ 1136.737752][    C0]  iterate_tty_write (drivers/tty/tty_io.c:1007)
[ 1136.737759][    C0]  ? tty_ldisc_ref_wait (drivers/tty/tty_ldisc.c:244)
[ 1136.737767][    C0]  file_tty_write.constprop.0 (drivers/tty/tty_io.c:1081)
[ 1136.737774][    C0]  vfs_write (fs/read_write.c:594 fs/read_write.c:686)
[ 1136.737788][    C0]  ? find_held_lock (kernel/locking/lockdep.c:5350)
[ 1136.737792][    C0]  ? kernel_write (fs/read_write.c:667)
[ 1136.737800][    C0]  ? clockevents_program_event (kernel/time/clockevents.c:326)
[ 1136.737817][    C0]  ? clockevents_program_event (kernel/time/clockevents.c:336 (discriminator 3))
[ 1136.737825][    C0]  ksys_write (fs/read_write.c:738)
[ 1136.737830][    C0]  ? __ia32_sys_read (fs/read_write.c:728)
[ 1136.737842][    C0]  do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94)
[ 1136.737849][    C0]  entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:130)
[ 1136.737852][    C0] RIP: 0033:0x7fbb344f4257
[ 1136.737857][    C0] Code: 0f 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24
All code
========
   0:	0f 00                	(bad)
   2:	f7 d8                	neg    %eax
   4:	64 89 02             	mov    %eax,%fs:(%rdx)
   7:	48 c7 c0 ff ff ff ff 	mov    $0xffffffffffffffff,%rax
   e:	eb b7                	jmp    0xffffffffffffffc7
  10:	0f 1f 00             	nopl   (%rax)
  13:	f3 0f 1e fa          	endbr64
  17:	64 8b 04 25 18 00 00 	mov    %fs:0x18,%eax
  1e:	00 
  1f:	85 c0                	test   %eax,%eax
  21:	75 10                	jne    0x33
  23:	b8 01 00 00 00       	mov    $0x1,%eax
  28:	0f 05                	syscall
  2a:*	48 3d 00 f0 ff ff    	cmp    $0xfffffffffffff000,%rax		<-- trapping instruction
  30:	77 51                	ja     0x83
  32:	c3                   	ret
  33:	48 83 ec 28          	sub    $0x28,%rsp
  37:	48 89 54 24 18       	mov    %rdx,0x18(%rsp)
  3c:	48                   	rex.W
  3d:	89                   	.byte 0x89
  3e:	74 24                	je     0x64

Code starting with the faulting instruction
===========================================
   0:	48 3d 00 f0 ff ff    	cmp    $0xfffffffffffff000,%rax
   6:	77 51                	ja     0x59
   8:	c3                   	ret
   9:	48 83 ec 28          	sub    $0x28,%rsp
   d:	48 89 54 24 18       	mov    %rdx,0x18(%rsp)
  12:	48                   	rex.W
  13:	89                   	.byte 0x89
  14:	74 24                	je     0x3a
[ 1136.737860][    C0] RSP: 002b:00007ffd2cdc87b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[ 1136.737863][    C0] RAX: ffffffffffffffda RBX: 000055bc8686f2e0 RCX: 00007fbb344f4257
[ 1136.737865][    C0] RDX: 0000000000000001 RSI: 000055bc8686f2e0 RDI: 0000000000000001
[ 1136.737866][    C0] RBP: 0000000000000001 R08: 0000000000000000 R09: 0000000000002000
[ 1136.737868][    C0] R10: 0000000000000001 R11: 0000000000000246 R12: 000055bc8685a600


Finger prints:
__report_bad_irq:note_interrupt:handle_irq_event:handle_edge_irq:__common_interrupt