make -C tools/testing/selftests TARGETS="net/forwarding" TEST_PROGS=tc_acttions.sh TEST_GEN_PROGS="" run_tests make: Entering directory '/home/virtme/testing-4/tools/testing/selftests' make[1]: Entering directory '/home/virtme/testing-4/tools/testing/selftests/net/forwarding' make[1]: Nothing to be done for 'all'. make[1]: Leaving directory '/home/virtme/testing-4/tools/testing/selftests/net/forwarding' make[1]: Entering directory '/home/virtme/testing-4/tools/testing/selftests/net/forwarding' TAP version 13 1..1 # overriding timeout to 21600 # selftests: net/forwarding: tc_actions.sh # 12.64 [+12.64] TEST: gact drop and ok (skip_hw) [ OK ] # 14.91 [+2.27] TEST: mirred egress flower redirect (skip_hw) [ OK ] # 17.15 [+2.24] TEST: mirred egress flower mirror (skip_hw) [ OK ] # 19.59 [+2.44] TEST: mirred egress matchall mirror (skip_hw) [ OK ] # 25.15 [+5.56] TEST: mirred_egress_to_ingress (skip_hw) [ OK ] # 25.88 [+0.73] P2 # 26.01 [+0.13] P2.1 # 26.21 [+0.20] P2.2 # 26.39 [+0.18] P2.3 # 26.39 [+0.00] P1 # 26.65 [+0.26] P1.1 # 26.94 [+0.29] P1.2 # 46.97 [+20.02] P3 # 77.81 [+30.85] TEST: mirred_egress_to_ingress_tcp (skip_hw) [ OK ] # 78.87 [+1.06] TEST: ingress_2nd_vlan_push (skip_hw) [ OK ] # 79.81 [+0.94] TEST: egress_2nd_vlan_push (skip_hw) [ OK ] # 79.96 [+0.15] INFO: Could not test offloaded functionality # 80.03 [+0.07] [ 0.000000] Linux version 6.13.0-virtme (virtme@netdev-3.bots.linux.dev) (gcc (GCC) 11.4.1 20230605 (Red Hat 11.4.1-2), GNU ld version 2.39-6.amzn2023.0.10) #1 SMP PREEMPT_DYNAMIC Thu Jan 23 10:01:55 PST 2025 # 80.03 [+0.01] [ 0.000000] Command line: virtme_hostname=virtme-ng nr_open=1073741816 virtme_link_mods=/home/virtme/testing-4/.virtme_mods/lib/modules/0.0.0 virtme_rw_overlay0=/etc virtme_rw_overlay1=/lib virtme_rw_overlay2=/home virtme_rw_overlay3=/opt virtme_rw_overlay4=/srv virtme_rw_overlay5=/usr virtme_rw_overlay6=/var virtme_rw_overlay7=/tmp console=hvc0 earlyprintk=serial,ttyS0,115200 virtme_console=ttyS0 psmouse.proto=exps virtme_chdir=home/virtme/testing-4 rootfstype=virtiofs root=ROOTFS raid=noautodetect ro init=/home/virtme/virtme-ng/virtme/guest/virtme-init # 80.05 [+0.02] [ 0.000000] BIOS-provided physical RAM map: # 80.05 [+0.00] [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable # 80.05 [+0.00] [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved # 80.06 [+0.00] [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved # 80.06 [+0.00] [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003fffefff] usable # 80.06 [+0.00] [ 0.000000] BIOS-e820: [mem 0x000000003ffff000-0x000000003fffffff] reserved # 80.06 [+0.00] [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved # 80.07 [+0.00] [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved # 80.07 [+0.00] [ 0.000000] printk: legacy bootconsole [earlyser0] enabled # 80.07 [+0.00] [ 0.000000] NX (Execute Disable) protection: active # 80.07 [+0.00] [ 0.000000] APIC: Static calls initialized # 80.07 [+0.00] [ 0.000000] SMBIOS 2.4 present. # 80.08 [+0.00] [ 0.000000] DMI: Bochs Bochs, BIOS Bochs 01/01/2011 # 80.08 [+0.00] [ 0.000000] DMI: Memory slots populated: 1/1 # 80.08 [+0.00] [ 0.000000] Hypervisor detected: KVM # 80.08 [+0.00] [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 # 80.08 [+0.00] [ 0.000002] kvm-clock: using sched offset of 648856898 cycles # 80.08 [+0.00] [ 0.000402] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns # 80.09 [+0.00] [ 0.001582] tsc: Detected 2999.998 MHz processor # 80.09 [+0.00] [ 0.002070] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved # 80.09 [+0.00] [ 0.002083] e820: remove [mem 0x000a0000-0x000fffff] usable # 80.09 [+0.00] [ 0.002094] last_pfn = 0x3ffff max_arch_pfn = 0x400000000 # 80.09 [+0.00] [ 0.002534] MTRR map: 4 entries (3 fixed + 1 variable; max 19), built from 8 variable MTRRs # 80.10 [+0.00] [ 0.003147] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT # 80.10 [+0.00] [ 0.010616] found SMP MP-table at [mem 0x000f4470-0x000f447f] # 80.10 [+0.00] [ 0.011211] Using GB pages for direct mapping # 80.10 [+0.00] [ 0.012402] ACPI: Early table checksum verification disabled # 80.10 [+0.00] [ 0.013004] ACPI: RSDP 0x00000000000F4290 000024 (v02 BOCHS ) # 80.11 [+0.00] [ 0.013505] ACPI: XSDT 0x000000003FFFFFB0 000034 (v01 BOCHS BXPC 00000001 BXPC 00000001) # 80.11 [+0.00] [ 0.014137] ACPI: FACP 0x000000003FFFFE3A 00010C (v05 BOCHS BXPC 00000001 BXPC 00000001) # 80.11 [+0.00] [ 0.014765] ACPI: DSDT 0x000000003FFFF200 000C3A (v02 BOCHS BXPC 00000001 BXPC 00000001) # 80.12 [+0.00] [ 0.015407] ACPI: APIC 0x000000003FFFFF46 00006A (v03 BOCHS BXPC 00000001 BXPC 00000001) # 80.12 [+0.00] [ 0.016027] ACPI: Reserving FACP table memory at [mem 0x3ffffe3a-0x3fffff45] # 80.12 [+0.00] [ 0.016545] ACPI: Reserving DSDT table memory at [mem 0x3ffff200-0x3ffffe39] # 80.12 [+0.00] [ 0.017061] ACPI: Reserving APIC table memory at [mem 0x3fffff46-0x3fffffaf] # 80.13 [+0.00] [ 0.018336] No NUMA configuration found # 80.13 [+0.00] [ 0.018645] Faking a node at [mem 0x0000000000000000-0x000000003fffefff] # 80.13 [+0.00] [ 0.019143] NODE_DATA(0) allocated [mem 0x3fffa140-0x3fffefff] # 80.13 [+0.00] [ 0.032467] Zone ranges: # 80.13 [+0.00] [ 0.032717] DMA [mem 0x0000000000001000-0x0000000000ffffff] # 80.13 [+0.00] [ 0.033183] DMA32 [mem 0x0000000001000000-0x000000003fffefff] # 80.14 [+0.00] [ 0.033652] Normal empty # 80.14 [+0.00] [ 0.033896] Device empty # 80.14 [+0.00] [ 0.034140] Movable zone start for each node # 80.14 [+0.00] [ 0.034475] Early memory node ranges # 80.14 [+0.00] [ 0.034764] node 0: [mem 0x0000000000001000-0x000000000009efff] # 80.14 [+0.00] [ 0.035249] node 0: [mem 0x0000000000100000-0x000000003fffefff] # 80.15 [+0.00] [ 0.035717] Initmem setup node 0 [mem 0x0000000000001000-0x000000003fffefff] # 80.15 [+0.00] [ 0.036253] On node 0, zone DMA: 1 pages in unavailable ranges # 80.15 [+0.00] [ 0.036824] On node 0, zone DMA: 97 pages in unavailable ranges # 80.15 [+0.00] [ 0.043837] On node 0, zone DMA32: 1 pages in unavailable ranges # 80.15 [+0.00] [ 0.157853] kasan: KernelAddressSanitizer initialized # 80.16 [+0.00] [ 0.158458] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) # 80.16 [+0.00] [ 0.158951] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23 # 80.16 [+0.00] [ 0.159533] IOAPIC[1]: apic_id 1, version 32, address 0xfec10000, GSI 24-47 # 80.16 [+0.00] [ 0.160057] ACPI: Using ACPI (MADT) for SMP configuration information # 80.16 [+0.00] [ 0.160555] TSC deadline timer available # 80.17 [+0.00] [ 0.160867] CPU topo: Max. logical packages: 1 # 80.17 [+0.00] [ 0.161221] CPU topo: Max. logical dies: 1 # 80.17 [+0.00] [ 0.161577] CPU topo: Max. dies per package: 1 # 80.17 [+0.00] [ 0.161932] CPU topo: Max. threads per core: 1 # 80.17 [+0.00] [ 0.162288] CPU topo: Num. cores per package: 4 # 80.17 [+0.00] [ 0.162659] CPU topo: Num. threads per package: 4 # 80.18 [+0.00] [ 0.163034] CPU topo: Allowing 4 present CPUs plus 0 hotplug CPUs # 80.18 [+0.00] [ 0.163556] kvm-guest: APIC: eoi() replaced with kvm_guest_apic_eoi_write() # 80.18 [+0.00] [ 0.164118] kvm-guest: KVM setup pv remote TLB flush # 80.18 [+0.00] [ 0.164501] kvm-guest: setup PV sched yield # 80.18 [+0.00] [ 0.164855] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] # 80.19 [+0.00] [ 0.165428] PM: hibernation: Registered nosave memory: [mem 0x0009f000-0x0009ffff] # 80.19 [+0.00] [ 0.165983] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000effff] # 80.19 [+0.00] [ 0.166545] PM: hibernation: Registered nosave memory: [mem 0x000f0000-0x000fffff] # 80.20 [+0.00] [ 0.167100] [mem 0x40000000-0xfeffbfff] available for PCI devices # 80.20 [+0.00] [ 0.167557] Booting paravirtualized kernel on KVM # 80.20 [+0.00] [ 0.167922] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns # 80.20 [+0.00] [ 0.187031] setup_percpu: NR_CPUS:64 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 # 80.21 [+0.00] [ 0.189471] percpu: Embedded 72 pages/cpu s257552 r8192 d29168 u524288 # 80.21 [+0.00] [ 0.189988] pcpu-alloc: s257552 r8192 d29168 u524288 alloc=1*2097152 # 80.21 [+0.00] [ 0.189996] pcpu-alloc: [0] 0 1 2 3 # 80.21 [+0.00] [ 0.190073] Kernel command line: virtme_hostname=virtme-ng nr_open=1073741816 virtme_link_mods=/home/virtme/testing-4/.virtme_mods/lib/modules/0.0.0 virtme_rw_overlay0=/etc virtme_rw_overlay1=/lib virtme_rw_overlay2=/home virtme_rw_overlay3=/opt virtme_rw_overlay4=/srv virtme_rw_overlay5=/usr virtme_rw_overlay6=/var virtme_rw_overlay7=/tmp console=hvc0 earlyprintk=serial,ttyS0,115200 virtme_console=ttyS0 psmouse.proto=exps virtme_chdir=home/virtme/testing-4 rootfstype=virtiofs root=ROOTFS raid=noautodetect ro init=/home/virtme/virtme-ng/virtme/guest/virtme-init # 80.23 [+0.02] [ 0.195179] Unknown kernel command line parameters "virtme_hostname=virtme-ng nr_open=1073741816 virtme_link_mods=/home/virtme/testing-4/.virtme_mods/lib/modules/0.0.0 virtme_rw_overlay0=/etc virtme_rw_overlay1=/lib virtme_rw_overlay2=/home virtme_rw_overlay3=/opt virtme_rw_overlay4=/srv virtme_rw_overlay5=/usr virtme_rw_overlay6=/var virtme_rw_overlay7=/tmp virtme_console=ttyS0 virtme_chdir=home/virtme/testing-4", will be passed to user space. # 80.25 [+0.01] [ 0.199045] random: crng init done # 80.25 [+0.00] [ 0.199442] printk: log buffer data + meta data: 262144 + 917504 = 1179648 bytes # 80.25 [+0.00] [ 0.201260] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) # 80.25 [+0.00] [ 0.202604] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) # 80.26 [+0.00] [ 0.203820] Fallback order for Node 0: 0 # 80.26 [+0.00] [ 0.203830] Built 1 zonelists, mobility grouping on. Total pages: 262045 # 80.26 [+0.00] [ 0.204932] Policy zone: DMA32 # 80.26 [+0.00] [ 0.205301] mem auto-init: stack:off, heap alloc:off, heap free:off # 80.26 [+0.00] [ 0.205919] stackdepot: allocating hash table via alloc_large_system_hash # 80.27 [+0.00] [ 0.206582] stackdepot hash table entries: 1048576 (order: 12, 16777216 bytes, linear) # 80.27 [+0.00] [ 0.323738] ********************************************************** # 80.27 [+0.00] [ 0.324271] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** # 80.27 [+0.00] [ 0.324736] ** ** # 80.27 [+0.00] [ 0.325235] ** This system shows unhashed kernel memory addresses ** # 80.28 [+0.00] [ 0.325698] ** via the console, logs, and other interfaces. This ** # 80.28 [+0.00] [ 0.326157] ** might reduce the security of your system. ** # 80.28 [+0.00] [ 0.326621] ** ** # 80.28 [+0.00] [ 0.327081] ** If you see this message and you are not debugging ** # 80.29 [+0.00] [ 0.327541] ** the kernel, report this immediately to your system ** # 80.29 [+0.00] [ 0.328004] ** administrator! ** # 80.29 [+0.00] [ 0.328465] ** ** # 80.29 [+0.00] [ 0.328928] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE ** # 80.29 [+0.00] [ 0.329414] ********************************************************** # 80.30 [+0.00] [ 0.330530] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 # 80.30 [+0.00] [ 0.334746] ftrace: allocating 53736 entries in 210 pages # 80.30 [+0.00] [ 0.416931] ftrace: allocated 210 pages with 4 groups # 80.30 [+0.00] [ 0.419751] Dynamic Preempt: voluntary # 80.30 [+0.00] [ 0.421400] Running RCU self tests # 80.31 [+0.00] [ 0.421668] Running RCU synchronous self tests # 80.31 [+0.00] [ 0.421999] rcu: Preemptible hierarchical RCU implementation. # 80.31 [+0.00] [ 0.422408] rcu: RCU event tracing is enabled. # 80.31 [+0.00] [ 0.422743] rcu: RCU lockdep checking is enabled. # 80.31 [+0.00] [ 0.423091] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. # 80.31 [+0.00] [ 0.423556] rcu: RCU callback double-/use-after-free debug is enabled. # 80.32 [+0.00] [ 0.424021] Trampoline variant of Tasks RCU enabled. # 80.32 [+0.00] [ 0.424390] Rude variant of Tasks RCU enabled. # 80.32 [+0.00] [ 0.424720] Tracing variant of Tasks RCU enabled. # 80.32 [+0.00] [ 0.425084] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. # 80.32 [+0.00] [ 0.425615] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 # 80.33 [+0.00] [ 0.426295] Running RCU synchronous self tests # 80.33 [+0.00] [ 0.426650] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. # 80.33 [+0.00] [ 0.427258] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. # 80.33 [+0.00] [ 0.427897] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=4. # 80.34 [+0.00] [ 0.496417] NR_IRQS: 4352, nr_irqs: 848, preallocated irqs: 0 # 80.34 [+0.00] [ 0.497184] rcu: srcu_init: Setting srcu_struct sizes based on contention. # 80.34 [+0.00] [ 0.498438] Console: colour *CGA 80x25 # 80.34 [+0.00] [ 0.498813] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar # 80.35 [+0.00] [ 0.499350] ... MAX_LOCKDEP_SUBCLASSES: 8 # 80.35 [+0.00] [ 0.499655] ... MAX_LOCK_DEPTH: 48 # 80.35 [+0.00] [ 0.499967] ... MAX_LOCKDEP_KEYS: 8192 # 80.35 [+0.00] [ 0.500288] ... CLASSHASH_SIZE: 4096 # 80.35 [+0.00] [ 0.500608] ... MAX_LOCKDEP_ENTRIES: 32768 # 80.35 [+0.00] [ 0.500936] ... MAX_LOCKDEP_CHAINS: 65536 # 80.35 [+0.00] [ 0.501263] ... CHAINHASH_SIZE: 32768 # 80.36 [+0.00] [ 0.501588] memory used by lock dependency info: 6429 kB # 80.36 [+0.00] [ 0.501977] memory used for stack traces: 4224 kB # 80.36 [+0.00] [ 0.502326] per task-struct memory footprint: 1920 bytes # 80.36 [+0.00] [ 0.502889] ACPI: Core revision 20240827 # 80.36 [+0.00] [ 0.503997] APIC: Switch to symmetric I/O mode setup # 80.36 [+0.00] [ 0.504400] kvm-guest: APIC: send_IPI_mask() replaced with kvm_send_ipi_mask() # 80.37 [+0.00] [ 0.504917] kvm-guest: APIC: send_IPI_mask_allbutself() replaced with kvm_send_ipi_mask_allbutself() # 80.37 [+0.00] [ 0.505557] kvm-guest: setup PV IPIs # 80.37 [+0.00] [ 0.506144] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2b3e43c8763, max_idle_ns: 440795360101 ns # 80.37 [+0.00] [ 0.506974] Calibrating delay loop (skipped) preset value.. 5999.99 BogoMIPS (lpj=2999998) # 80.38 [+0.00] [ 0.507672] x86/cpu: User Mode Instruction Prevention (UMIP) activated # 80.38 [+0.00] [ 0.507960] numa_add_cpu cpu 0 node 0: mask now 0 # 80.38 [+0.00] [ 0.507960] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 # 80.38 [+0.00] [ 0.507960] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 # 80.38 [+0.00] [ 0.507960] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization # 80.39 [+0.00] [ 0.507960] Spectre V2 : Spectre BHI mitigation: SW BHB clearing on syscall and VM exit # 80.39 [+0.00] [ 0.507960] Spectre V2 : Mitigation: Enhanced / Automatic IBRS # 80.39 [+0.00] [ 0.507960] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch # 80.39 [+0.00] [ 0.507960] Spectre V2 : Spectre v2 / PBRSB-eIBRS: Retire a single CALL on VMEXIT # 80.40 [+0.00] [ 0.507960] RETBleed: Mitigation: Enhanced IBRS # 80.40 [+0.00] [ 0.507960] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier # 80.41 [+0.01] [ 0.507960] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl # 80.41 [+0.01] [ 0.507960] TAA: Mitigation: TSX disabled # 80.41 [+0.00] [ 0.507960] MMIO Stale Data: Mitigation: Clear CPU buffers # 80.42 [+0.00] [ 0.507960] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' # 80.42 [+0.00] [ 0.507960] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' # 80.42 [+0.00] [ 0.507960] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' # 80.42 [+0.00] [ 0.507960] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers' # 80.42 [+0.00] [ 0.507960] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR' # 80.43 [+0.00] [ 0.507960] x86/fpu: Supporting XSAVE feature 0x020: 'AVX-512 opmask' # 80.43 [+0.00] [ 0.507960] x86/fpu: Supporting XSAVE feature 0x040: 'AVX-512 Hi256' # 80.43 [+0.00] [ 0.507960] x86/fpu: Supporting XSAVE feature 0x080: 'AVX-512 ZMM_Hi256' # 80.43 [+0.00] [ 0.507960] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers' # 80.43 [+0.00] [ 0.507960] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 # 80.44 [+0.00] [ 0.507960] x86/fpu: xstate_offset[3]: 832, xstate_sizes[3]: 64 # 80.44 [+0.00] [ 0.507960] x86/fpu: xstate_offset[4]: 896, xstate_sizes[4]: 64 # 80.44 [+0.00] [ 0.507960] x86/fpu: xstate_offset[5]: 960, xstate_sizes[5]: 64 # 80.44 [+0.00] [ 0.507960] x86/fpu: xstate_offset[6]: 1024, xstate_sizes[6]: 512 # 80.44 [+0.00] [ 0.507960] x86/fpu: xstate_offset[7]: 1536, xstate_sizes[7]: 1024 # 80.45 [+0.00] [ 0.507960] x86/fpu: xstate_offset[9]: 2560, xstate_sizes[9]: 8 # 80.45 [+0.00] [ 0.507960] x86/fpu: Enabled xstate features 0x2ff, context size is 2568 bytes, using 'compacted' format. # 80.45 [+0.00] [ 0.507960] Freeing SMP alternatives memory: 40K # 80.45 [+0.00] [ 0.507960] pid_max: default: 32768 minimum: 301 # 80.45 [+0.00] [ 0.507960] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) # 80.46 [+0.00] [ 0.507960] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) # 80.46 [+0.00] [ 0.507960] Running RCU synchronous self tests # 80.46 [+0.00] [ 0.507960] Running RCU synchronous self tests # 80.46 [+0.00] [ 0.507960] smpboot: CPU0: Intel(R) Xeon(R) Platinum 8275CL CPU @ 3.00GHz (family: 0x6, model: 0x55, stepping: 0x7) # 80.47 [+0.00] [ 0.513883] Running RCU Tasks wait API self tests # 80.47 [+0.00] [ 0.619164] Running RCU Tasks Rude wait API self tests # 80.47 [+0.00] [ 0.619567] Running RCU Tasks Trace wait API self tests # 80.47 [+0.00] [ 0.620087] Performance Events: Skylake events, full-width counters, Intel PMU driver. # 80.47 [+0.00] [ 0.620805] ... version: 2 # 80.48 [+0.00] [ 0.620969] ... bit width: 48 # 80.48 [+0.00] [ 0.621324] ... generic registers: 4 # 80.48 [+0.00] [ 0.621672] ... value mask: 0000ffffffffffff # 80.48 [+0.00] [ 0.621975] ... max period: 00007fffffffffff # 80.48 [+0.00] [ 0.622383] ... fixed-purpose events: 3 # 80.48 [+0.00] [ 0.622697] ... event mask: 000000070000000f # 80.49 [+0.00] [ 0.623506] signal: max sigframe size: 3632 # 80.49 [+0.00] [ 0.625100] rcu: Hierarchical SRCU implementation. # 80.49 [+0.00] [ 0.625443] rcu: Max phase no-delay instances is 400. # 80.49 [+0.00] [ 0.626116] Callback from call_rcu_tasks_trace() invoked. # 80.49 [+0.00] [ 0.627260] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level # 80.50 [+0.00] [ 0.638411] smp: Bringing up secondary CPUs ... # 80.50 [+0.00] [ 0.641706] smpboot: x86: Booting SMP configuration: # 80.50 [+0.00] [ 0.641993] .... node #0, CPUs: #1 #2 #3 # 80.50 [+0.00] [ 0.010278] numa_add_cpu cpu 1 node 0: mask now 0-1 # 80.50 [+0.00] [ 0.010278] numa_add_cpu cpu 2 node 0: mask now 0-2 # 80.50 [+0.00] [ 0.010278] numa_add_cpu cpu 3 node 0: mask now 0-3 # 80.51 [+0.00] [ 0.649110] smp: Brought up 1 node, 4 CPUs # 80.51 [+0.00] [ 0.650254] smpboot: Total of 4 processors activated (23999.98 BogoMIPS) # 80.51 [+0.00] [ 0.654370] Memory: 745864K/1048180K available (49152K kernel code, 13921K rwdata, 11660K rodata, 6732K init, 17564K bss, 289692K reserved, 0K cma-reserved) # 80.51 [+0.00] [ 0.657004] devtmpfs: initialized # 80.51 [+0.00] [ 0.658790] x86/mm: Memory block size: 128MB # 80.52 [+0.00] [ 0.675546] Running RCU synchronous self tests # 80.52 [+0.00] [ 0.675913] Running RCU synchronous self tests # 80.52 [+0.00] [ 0.676049] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns # 80.52 [+0.00] [ 0.676696] futex hash table entries: 1024 (order: 5, 131072 bytes, linear) # 80.53 [+0.00] [ 0.678968] PM: RTC time: 18:12:56, date: 2025-01-23 # 80.53 [+0.00] [ 0.685101] NET: Registered PF_NETLINK/PF_ROUTE protocol family # 80.53 [+0.00] [ 0.690169] thermal_sys: Registered thermal governor 'step_wise' # 80.53 [+0.00] [ 0.690176] thermal_sys: Registered thermal governor 'user_space' # 80.54 [+0.00] [ 0.690876] cpuidle: using governor menu # 80.54 [+0.00] [ 0.694510] PCI: Fatal: No config space access function found # 80.54 [+0.00] [ 0.695456] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. # 80.54 [+0.00] [ 0.703169] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages # 80.55 [+0.00] [ 0.703540] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page # 80.55 [+0.00] [ 0.704017] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages # 80.55 [+0.00] [ 0.704438] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page # 80.55 [+0.00] [ 0.710923] ACPI: Added _OSI(Module Device) # 80.56 [+0.00] [ 0.711021] ACPI: Added _OSI(Processor Device) # 80.56 [+0.00] [ 0.711339] ACPI: Added _OSI(3.0 _SCP Extensions) # 80.56 [+0.00] [ 0.711671] ACPI: Added _OSI(Processor Aggregator Device) # 80.56 [+0.00] [ 0.779752] ACPI: 1 ACPI AML tables successfully acquired and loaded # 80.56 [+0.00] [ 0.804945] ACPI: Interpreter enabled # 80.57 [+0.00] [ 0.805539] ACPI: PM: (supports S0 S5) # 80.57 [+0.00] [ 0.805845] ACPI: Using IOAPIC for interrupt routing # 80.57 [+0.00] [ 0.807579] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug # 80.57 [+0.00] [ 0.807968] PCI: Using E820 reservations for host bridge windows # 80.57 [+0.00] [ 0.835104] Callback from call_rcu_tasks() invoked. # 80.58 [+0.00] [ 0.872814] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) # 80.58 [+0.00] [ 0.873730] acpi PNP0A08:00: _OSC: OS supports [ASPM ClockPM Segments MSI HPX-Type3] # 80.58 [+0.00] [ 0.873970] acpi PNP0A08:00: _OSC: not requesting OS control; OS requires [ExtendedConfig ASPM ClockPM MSI] # 80.59 [+0.00] [ 0.891533] acpi PNP0A08:00: ECAM [mem 0xe0000000-0xefffffff] reserved as ACPI motherboard resource # 80.59 [+0.00] [ 0.941869] acpi PNP0A08:00: ECAM [mem 0xe0000000-0xefffffff] (base 0xe0000000) # 80.59 [+0.00] [ 0.945960] PCI host bridge to bus 0000:00 # 80.59 [+0.00] [ 0.951304] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff window] # 80.59 [+0.00] [ 0.952013] pci_bus 0000:00: root bus resource [mem 0x300000000000-0x3fffffffffff window] # 80.60 [+0.00] [ 0.952680] pci_bus 0000:00: root bus resource [bus 00-ff] # 80.60 [+0.00] [ 0.953215] pci 0000:00:00.0: [1b36:0008] type 00 class 0x060000 conventional PCI endpoint # 80.60 [+0.00] [ 0.957237] ACPI: PCI: Interrupt link GSI0 configured for IRQ 16 # 80.60 [+0.00] [ 0.958743] ACPI: PCI: Interrupt link GSI1 configured for IRQ 17 # 80.61 [+0.00] [ 0.959802] ACPI: PCI: Interrupt link GSI2 configured for IRQ 18 # 80.61 [+0.00] [ 0.960589] ACPI: PCI: Interrupt link GSI3 configured for IRQ 19 # 80.61 [+0.00] [ 0.964284] iommu: Default domain type: Translated # 80.61 [+0.00] [ 0.964631] iommu: DMA domain TLB invalidation policy: lazy mode # 80.61 [+0.00] [ 0.970225] SCSI subsystem initialized # 80.62 [+0.00] [ 0.971528] libata version 3.00 loaded. # 80.62 [+0.00] [ 0.973760] pps_core: LinuxPPS API ver. 1 registered # 80.62 [+0.00] [ 0.973968] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti # 80.63 [+0.01] [ 0.974760] PTP clock support registered # 80.63 [+0.00] [ 0.978443] Advanced Linux Sound Architecture Driver Initialized. # 80.63 [+0.00] [ 0.986399] PCI: Using ACPI for IRQ routing # 80.63 [+0.00] [ 0.986720] PCI: pci_cache_line_size set to 64 bytes # 80.64 [+0.00] [ 0.986747] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] # 80.64 [+0.00] [ 0.986803] e820: reserve RAM buffer [mem 0x3ffff000-0x3fffffff] # 80.64 [+0.00] [ 0.988115] vgaarb: loaded # 80.64 [+0.00] [ 0.990248] clocksource: Switched to clocksource kvm-clock # 80.64 [+0.00] [ 1.025466] VFS: Disk quotas dquot_6.6.0 # 80.64 [+0.00] [ 1.025983] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) # 80.65 [+0.00] [ 1.032481] pnp: PnP ACPI init # 80.65 [+0.00] [ 1.037598] system 00:02: [mem 0xe0000000-0xefffffff window] has been reserved # 80.65 [+0.00] [ 1.038367] pnp: PnP ACPI: found 3 devices # 80.65 [+0.00] [ 1.092481] NET: Registered PF_INET protocol family # 80.65 [+0.00] [ 1.093393] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) # 80.65 [+0.00] [ 1.099176] tcp_listen_portaddr_hash hash table entries: 512 (order: 3, 36864 bytes, linear) # 80.66 [+0.00] [ 1.099841] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) # 80.66 [+0.00] [ 1.100468] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear) # 80.66 [+0.00] [ 1.101455] TCP bind hash table entries: 8192 (order: 8, 1179648 bytes, linear) # 80.66 [+0.00] [ 1.103324] TCP: Hash tables configured (established 8192 bind 8192) # 80.67 [+0.00] [ 1.104406] UDP hash table entries: 512 (order: 5, 131072 bytes, linear) # 80.67 [+0.00] [ 1.105099] UDP-Lite hash table entries: 512 (order: 5, 131072 bytes, linear) # 80.67 [+0.00] [ 1.106947] NET: Registered PF_UNIX/PF_LOCAL protocol family # 80.67 [+0.00] [ 1.107665] pci_bus 0000:00: resource 4 [mem 0xc0000000-0xdfffffff window] # 80.68 [+0.00] [ 1.108134] pci_bus 0000:00: resource 5 [mem 0x300000000000-0x3fffffffffff window] # 80.68 [+0.00] [ 1.108842] PCI: CLS 0 bytes, default 64 # 80.68 [+0.00] [ 1.110495] RAPL PMU: API unit is 2^-32 Joules, 0 fixed counters, 10737418240 ms ovfl timer # 80.68 [+0.00] [ 1.125844] kvm_amd: CPU 1 isn't AMD or Hygon # 80.68 [+0.00] [ 1.126199] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2b3e43c8763, max_idle_ns: 440795360101 ns # 80.69 [+0.00] [ 1.146240] Initialise system trusted keyrings # 80.69 [+0.00] [ 1.147394] workingset: timestamp_bits=56 max_order=18 bucket_order=0 # 80.69 [+0.00] [ 1.164206] squashfs: version 4.0 (2009/01/31) Phillip Lougher # 80.69 [+0.00] [ 1.164829] fuse: init (API version 7.41) # 80.69 [+0.00] [ 1.166336] 9p: Installing v9fs 9p2000 file system support # 80.70 [+0.00] [ 1.182870] Key type asymmetric registered # 80.70 [+0.00] [ 1.183214] Asymmetric key parser 'x509' registered # 80.70 [+0.00] [ 1.184100] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) # 80.70 [+0.00] [ 1.184861] io scheduler mq-deadline registered # 80.70 [+0.00] [ 1.185179] io scheduler kyber registered # 80.71 [+0.00] [ 1.191353] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 # 80.71 [+0.00] [ 1.192977] ACPI: button: Power Button [PWRB] # 80.71 [+0.00] [ 1.197480] virtiofs virtio0: discovered new tag: ROOTFS # 80.71 [+0.00] [ 1.199262] virtiofs virtio0: virtio_fs_setup_dax: No cache capability # 80.71 [+0.00] [ 1.205788] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled # 80.72 [+0.00] [ 1.209360] 00:00: ttyS0 at I/O 0x3f8 (irq = 51, base_baud = 115200) is a 16550A # 80.72 [+0.00] [ 1.391611] Non-volatile memory driver v1.3 # 80.72 [+0.00] [ 1.392015] Linux agpgart interface v0.103 # 80.72 [+0.00] [ 1.393970] ACPI: bus type drm_connector registered # 80.72 [+0.00] [ 1.453913] loop: module loaded # 80.72 [+0.00] [ 1.471130] i8042: PNP: No PS/2 controller found. # 80.73 [+0.00] [ 1.481613] rtc_cmos 00:01: registered as rtc0 # 80.73 [+0.00] [ 1.482135] rtc_cmos 00:01: setting system clock to 2025-01-23T18:12:57 UTC (1737655977) # 80.73 [+0.00] [ 1.483651] rtc_cmos 00:01: alarms up to one day, 242 bytes nvram # 80.73 [+0.00] [ 1.489733] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev # 80.74 [+0.00] [ 1.505552] NET: Registered PF_INET6 protocol family # 80.74 [+0.00] [ 1.506466] printk: legacy console [hvc0] enabled # 80.74 [+0.00] [ 1.507011] printk: legacy bootconsole [earlyser0] disabled # 80.74 [+0.00] [ 1.514376] Segment Routing with IPv6 # 80.74 [+0.00] [ 1.515204] In-situ OAM (IOAM) with IPv6 # 80.74 [+0.00] [ 1.516097] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver # 80.75 [+0.00] [ 1.520896] NET: Registered PF_PACKET protocol family # 80.75 [+0.00] [ 1.521318] 9pnet: Installing 9P2000 support # 80.75 [+0.00] [ 1.521836] Key type dns_resolver registered # 80.75 [+0.00] [ 1.529081] IPI shorthand broadcast: enabled # 80.75 [+0.00] [ 1.714942] sched_clock: Marking stable (1705006131, 9278171)->(1785332885, -71048583) # 80.75 [+0.00] [ 1.718064] registered taskstats version 1 # 80.76 [+0.00] [ 1.722040] Loading compiled-in X.509 certificates # 80.76 [+0.00] [ 1.826319] Demotion targets for Node 0: null # 80.76 [+0.00] [ 1.827338] kmemleak: Kernel memory leak detector initialized (mem pool available: 15364) # 80.76 [+0.00] [ 1.827355] kmemleak: Automatic memory scanning thread started # 80.76 [+0.00] [ 1.827611] page_owner is disabled # 80.76 [+0.00] [ 1.828442] PM: Magic number: 9:774:241 # 80.77 [+0.00] [ 1.828766] printk: legacy console [netcon0] enabled # 80.77 [+0.00] [ 1.829050] netconsole: network logging started # 80.77 [+0.00] [ 1.830439] ALSA device list: # 80.77 [+0.00] [ 1.830593] No soundcards found. # 80.77 [+0.00] [ 1.832946] md: Skipping autodetection of RAID arrays. (raid=autodetect will force) # 80.77 [+0.00] [ 1.836380] VFS: Mounted root (virtiofs filesystem) readonly on device 0:20. # 80.78 [+0.00] [ 1.837459] devtmpfs: mounted # 80.78 [+0.00] [ 1.878665] Freeing unused kernel image (initmem) memory: 6732K # 80.78 [+0.00] [ 1.878986] Write protecting the kernel read-only data: 61440k # 80.78 [+0.00] [ 1.881452] Freeing unused kernel image (rodata/data gap) memory: 628K # 80.78 [+0.00] [ 1.881889] Run /home/virtme/virtme-ng/virtme/guest/virtme-init as init process # 80.79 [+0.00] [ 1.882128] with arguments: # 80.79 [+0.01] [ 1.882133] /home/virtme/virtme-ng/virtme/guest/virtme-init # 80.80 [+0.00] [ 1.882137] with environment: # 80.80 [+0.00] [ 1.882141] HOME=/ # 80.80 [+0.00] [ 1.882145] TERM=linux # 80.80 [+0.00] [ 1.882148] virtme_hostname=virtme-ng # 80.80 [+0.00] [ 1.882152] nr_open=1073741816 # 80.81 [+0.00] [ 1.882155] virtme_link_mods=/home/virtme/testing-4/.virtme_mods/lib/modules/0.0.0 # 80.81 [+0.00] [ 1.882159] virtme_rw_overlay0=/etc # 80.81 [+0.00] [ 1.882163] virtme_rw_overlay1=/lib # 80.81 [+0.00] [ 1.882166] virtme_rw_overlay2=/home # 80.81 [+0.00] [ 1.882170] virtme_rw_overlay3=/opt # 80.82 [+0.00] [ 1.882173] virtme_rw_overlay4=/srv # 80.82 [+0.00] [ 1.882177] virtme_rw_overlay5=/usr # 80.82 [+0.00] [ 1.882180] virtme_rw_overlay6=/var # 80.82 [+0.00] [ 1.882184] virtme_rw_overlay7=/tmp # 80.82 [+0.00] [ 1.882187] virtme_console=ttyS0 # 80.82 [+0.00] [ 1.882190] virtme_chdir=home/virtme/testing-4 # 80.83 [+0.00] [ 2.064430] mount (71) used greatest stack depth: 25824 bytes left # 80.83 [+0.00] [ 2.139427] mount (72) used greatest stack depth: 24456 bytes left # 80.83 [+0.00] [ 3.307850] virtme-init: basic initialization done # 80.83 [+0.00] [ 3.458194] virtme-init: running systemd-tmpfiles # 80.83 [+0.00] [ 3.473343] virtme-init: starting udevd # 80.84 [+0.00] [ 3.694590] virtme-init: triggering udev coldplug # 80.84 [+0.00] [ 6.062850] virtme-init: waiting for udev to settle # 80.84 [+0.00] [ 6.192486] awk (137) used greatest stack depth: 24328 bytes left # 80.84 [+0.00] [ 6.799108] virtme-init: udev is done # 80.84 [+0.00] [ 7.534341] virtme-init: Setting hostname to virtme-ng... # 80.84 [+0.00] [ 14.533026] 8021q: 802.1Q VLAN Support v1.8 # 80.85 [+0.00] [ 19.801064] br10: port 1(veth1.10) entered blocking state # 80.85 [+0.00] [ 19.801495] br10: port 1(veth1.10) entered disabled state # 80.85 [+0.00] [ 19.801846] veth1.10: entered allmulticast mode # 80.85 [+0.00] [ 19.802024] veth1: entered allmulticast mode # 80.85 [+0.00] [ 19.804353] veth1.10: entered promiscuous mode # 80.85 [+0.00] [ 19.804552] veth1: entered promiscuous mode # 80.86 [+0.00] [ 19.927837] br10: port 2(veth2.10) entered blocking state # 80.86 [+0.00] [ 19.928119] br10: port 2(veth2.10) entered disabled state # 80.86 [+0.00] [ 19.928399] veth2.10: entered allmulticast mode # 80.86 [+0.00] [ 19.928576] veth2: entered allmulticast mode # 80.86 [+0.00] [ 19.930466] veth2.10: entered promiscuous mode # 80.86 [+0.00] [ 19.930667] veth2: entered promiscuous mode # 80.87 [+0.00] [ 20.064124] br10: port 2(veth2.10) entered blocking state # 80.87 [+0.00] [ 20.064541] br10: port 2(veth2.10) entered forwarding state # 80.87 [+0.00] [ 20.065208] br10: port 1(veth1.10) entered blocking state # 80.87 [+0.00] [ 20.065482] br10: port 1(veth1.10) entered forwarding state # 80.87 [+0.00] [ 21.177429] br11: port 1(veth1.11) entered blocking state # 80.88 [+0.00] [ 21.177722] br11: port 1(veth1.11) entered disabled state # 80.88 [+0.00] [ 21.177998] veth1.11: entered allmulticast mode # 80.88 [+0.00] [ 21.180394] veth1.11: entered promiscuous mode # 80.88 [+0.00] [ 21.310202] br11: port 2(veth2.11) entered blocking state # 80.88 [+0.00] [ 21.310848] br11: port 2(veth2.11) entered disabled state # 80.88 [+0.00] [ 21.311124] veth2.11: entered allmulticast mode # 80.89 [+0.00] [ 21.313014] veth2.11: entered promiscuous mode # 80.89 [+0.00] [ 21.430583] br11: port 2(veth2.11) entered blocking state # 80.89 [+0.00] [ 21.430935] br11: port 2(veth2.11) entered forwarding state # 80.89 [+0.00] [ 21.431453] br11: port 1(veth1.11) entered blocking state # 80.89 [+0.00] [ 21.431751] br11: port 1(veth1.11) entered forwarding state # 80.89 [+0.00] [ 22.606580] br12: port 1(veth1.12) entered blocking state # 80.90 [+0.00] [ 22.606869] br12: port 1(veth1.12) entered disabled state # 80.90 [+0.00] [ 22.607142] veth1.12: entered allmulticast mode # 80.90 [+0.00] [ 22.609102] veth1.12: entered promiscuous mode # 80.90 [+0.00] [ 22.749636] br12: port 2(veth2.12) entered blocking state # 80.90 [+0.00] [ 22.749946] br12: port 2(veth2.12) entered disabled state # 80.91 [+0.00] [ 22.750258] veth2.12: entered allmulticast mode # 80.91 [+0.00] [ 22.752710] veth2.12: entered promiscuous mode # 80.91 [+0.00] [ 22.897617] br12: port 2(veth2.12) entered blocking state # 80.91 [+0.00] [ 22.897944] br12: port 2(veth2.12) entered forwarding state # 80.91 [+0.00] [ 22.898466] br12: port 1(veth1.12) entered blocking state # 80.91 [+0.00] [ 22.898744] br12: port 1(veth1.12) entered forwarding state # 80.92 [+0.00] [ 441.558868] br12: port 2(veth2.12) entered disabled state # 80.92 [+0.00] [ 441.678875] br12: port 1(veth1.12) entered disabled state # 80.92 [+0.00] [ 441.929259] veth2.12: left allmulticast mode # 80.92 [+0.00] [ 441.929687] veth2.12: left promiscuous mode # 80.92 [+0.00] [ 441.930213] br12: port 2(veth2.12) entered disabled state # 80.92 [+0.00] [ 442.035660] veth1.12: left allmulticast mode # 80.93 [+0.00] [ 442.035904] veth1.12: left promiscuous mode # 80.93 [+0.00] [ 442.036340] br12: port 1(veth1.12) entered disabled state # 80.93 [+0.00] [ 442.594782] br11: port 2(veth2.11) entered disabled state # 80.93 [+0.00] [ 442.701891] br11: port 1(veth1.11) entered disabled state # 80.93 [+0.00] [ 442.912388] veth2.11: left allmulticast mode # 80.93 [+0.00] [ 442.912709] veth2.11: left promiscuous mode # 80.94 [+0.00] [ 442.913112] br11: port 2(veth2.11) entered disabled state # 80.94 [+0.00] [ 443.013353] veth1.11: left allmulticast mode # 80.94 [+0.00] [ 443.013608] veth1.11: left promiscuous mode # 80.94 [+0.00] [ 443.013948] br11: port 1(veth1.11) entered disabled state # 80.94 [+0.00] [ 443.596753] veth2: left allmulticast mode # 80.94 [+0.00] [ 443.597018] veth2: left promiscuous mode # 80.94 [+0.00] [ 443.598612] br10: port 2(veth2.10) entered disabled state # 80.95 [+0.00] [ 443.704665] veth1: left allmulticast mode # 80.95 [+0.00] [ 443.704926] veth1: left promiscuous mode # 80.95 [+0.00] [ 443.706972] br10: port 1(veth1.10) entered disabled state # 80.95 [+0.00] [ 443.959476] veth2.10: left allmulticast mode # 80.95 [+0.00] [ 443.960090] veth2.10: left promiscuous mode # 80.95 [+0.00] [ 443.960449] br10: port 2(veth2.10) entered disabled state # 80.96 [+0.00] [ 444.082521] veth1.10: left allmulticast mode # 80.96 [+0.00] [ 444.082919] veth1.10: left promiscuous mode # 80.96 [+0.00] [ 444.083456] br10: port 1(veth1.10) entered disabled state # 80.96 [+0.00] [ 454.024672] br0: port 1(veth1) entered blocking state # 80.96 [+0.00] [ 454.025140] br0: port 1(veth1) entered disabled state # 80.96 [+0.00] [ 454.027552] veth1: entered allmulticast mode # 80.97 [+0.00] [ 454.030870] veth1: entered promiscuous mode # 80.97 [+0.00] [ 454.113155] br0: port 2(veth2) entered blocking state # 80.97 [+0.00] [ 454.113508] br0: port 2(veth2) entered disabled state # 80.97 [+0.00] [ 454.113818] veth2: entered allmulticast mode # 80.97 [+0.00] [ 454.115800] veth2: entered promiscuous mode # 80.97 [+0.00] [ 454.315274] br0: port 1(veth1) entered blocking state # 80.98 [+0.00] [ 454.315792] br0: port 1(veth1) entered forwarding state # 80.98 [+0.00] [ 454.406984] br0: port 2(veth2) entered blocking state # 80.98 [+0.00] [ 454.407325] br0: port 2(veth2) entered forwarding state # 80.98 [+0.00] [ 465.921751] GACT probability NOT on # 80.98 [+0.00] [ 644.979265] br0: port 2(veth2) entered disabled state # 80.98 [+0.00] [ 645.079246] br0: port 1(veth1) entered disabled state # 80.99 [+0.00] [ 645.177015] veth2: left allmulticast mode # 80.99 [+0.00] [ 645.177300] veth2: left promiscuous mode # 80.99 [+0.00] [ 645.177650] br0: port 2(veth2) entered disabled state # 80.99 [+0.00] [ 645.178980] veth1: left allmulticast mode # 80.99 [+0.00] [ 645.179200] veth1: left promiscuous mode # 80.99 [+0.00] [ 645.179532] br0: port 1(veth1) entered disabled state # 80.99 [+0.00] [ 645.264109] ip (3482) used greatest stack depth: 24256 bytes left # 81.00 [+0.00] [ 646.193444] ip (3494) used greatest stack depth: 24240 bytes left # 81.00 [+0.00] [ 654.690132] gre: GRE over IPv4 demultiplexor driver # 81.00 [+0.00] [ 654.742371] ip_gre: GRE over IPv4 tunneling driver # 81.00 [+0.00] [ 889.846216] Mirror/redirect action on # 81.00 [+0.00] [ 889.869672] tc (4307) used greatest stack depth: 23800 bytes left # 81.00 [+0.00] [ 960.881050] tc (4629) used greatest stack depth: 23400 bytes left ok 1 selftests: net/forwarding: tc_actions.sh make[1]: Leaving directory '/home/virtme/testing-4/tools/testing/selftests/net/forwarding' make: Leaving directory '/home/virtme/testing-4/tools/testing/selftests' xx__-> echo $? 0 xx__-> echo scan > /sys/kernel/debug/kmemleak && cat /sys/kernel/debug/kmemleak xx__->