make -C tools/testing/selftests TARGETS="drivers/net/netdevsim" TEST_PROGSS=udp_tunnel_nic.sh TEST_GEN_PROGS="" run_tests
make: Entering directory '/home/virtme/testing-13/tools/testing/selftests'
make[1]: Entering directory '/home/virtme/testing-13/tools/testing/selftests/drivers/net/netdevsim'
make[1]: Nothing to be done for 'all'.
make[1]: Leaving directory '/home/virtme/testing-13/tools/testing/selftests/drivers/net/netdevsim'
make[1]: Entering directory '/home/virtme/testing-13/tools/testing/selftests/drivers/net/netdevsim'
TAP version 13
1..1
# timeout set to 600
# selftests: drivers/net/netdevsim: udp_tunnel_nic.sh
# Error: VXLAN GPE does not support this combination of attributes.
# Cannot find device "vxlanG0"
# ERROR: ethtool table 1 on port 0: module tests - table sharing - share
#        check_table: ethtool does not contain 'port 30001, vxlan-gpe'
# Tunnel information for eni283np1:
#   UDP port table 0: 
#     Size: 4
#     Types: vxlan
#     Entries (3):
#         port 10000, vxlan
#         port 10004, vxlan
#         port 10003, vxlan
#   UDP port table 1: 
#     Size: 4
#     Types: geneve, vxlan-gpe
#     Entries (3):
#         port 20000, geneve
#         port 20004, geneve
#         port 20003, geneve
# Error: VXLAN GPE does not support this combination of attributes.
# Cannot find device "vxlanG1"
# ERROR: ethtool table 1 on port 0: module tests - table sharing - overflow
#        check_table: ethtool does not contain 'port 30001, vxlan-gpe'
# Tunnel information for eni283np1:
#   UDP port table 0: 
#     Size: 4
#     Types: vxlan
#     Entries (3):
#         port 10000, vxlan
#         port 10004, vxlan
#         port 10003, vxlan
#   UDP port table 1: 
#     Size: 4
#     Types: geneve, vxlan-gpe
#     Entries (3):
#         port 20000, geneve
#         port 20004, geneve
#         port 20003, geneve
# Error: VXLAN GPE does not support this combination of attributes.
# Cannot find device "vxlanG2"
# ERROR: ethtool table 1 on port 0: module tests - table sharing - overflow v6
#        check_table: ethtool does not contain 'port 30001, vxlan-gpe'
# Tunnel information for eni283np1:
#   UDP port table 0: 
#     Size: 4
#     Types: vxlan
#     Entries (3):
#         port 10000, vxlan
#         port 10004, vxlan
#         port 10003, vxlan
#   UDP port table 1: 
#     Size: 4
#     Types: geneve, vxlan-gpe
#     Entries (3):
#         port 20000, geneve
#         port 20004, geneve
#         port 20003, geneve
# ERROR: ethtool table 1 on port 0: module tests - table sharing - overflow v6
#        check_table: ethtool does not contain 'port 30002, vxlan-gpe'
# Tunnel information for eni283np1:
#   UDP port table 0: 
#     Size: 4
#     Types: vxlan
#     Entries (3):
#         port 10000, vxlan
#         port 10004, vxlan
#         port 10003, vxlan
#   UDP port table 1: 
#     Size: 4
#     Types: geneve, vxlan-gpe
#     Entries (2):
#         port 20000, geneve
#         port 20003, geneve
# Error: VXLAN GPE does not support this combination of attributes.
# Cannot find device "vxlanG0"
# ERROR: ethtool table 1 on port 1: module tests - table sharing - share
#        check_table: ethtool does not contain 'port 30001, vxlan-gpe'
# Tunnel information for eni283np2:
#   UDP port table 0: 
#     Size: 4
#     Types: vxlan
#     Entries (3):
#         port 10000, vxlan
#         port 10004, vxlan
#         port 10003, vxlan
#   UDP port table 1: 
#     Size: 4
#     Types: geneve, vxlan-gpe
#     Entries (3):
#         port 20000, geneve
#         port 20004, geneve
#         port 20003, geneve
# Error: VXLAN GPE does not support this combination of attributes.
# Cannot find device "vxlanG1"
# ERROR: ethtool table 1 on port 1: module tests - table sharing - overflow
#        check_table: ethtool does not contain 'port 30001, vxlan-gpe'
# Tunnel information for eni283np2:
#   UDP port table 0: 
#     Size: 4
#     Types: vxlan
#     Entries (3):
#         port 10000, vxlan
#         port 10004, vxlan
#         port 10003, vxlan
#   UDP port table 1: 
#     Size: 4
#     Types: geneve, vxlan-gpe
#     Entries (3):
#         port 20000, geneve
#         port 20004, geneve
#         port 20003, geneve
# Error: VXLAN GPE does not support this combination of attributes.
# Cannot find device "vxlanG2"
# ERROR: ethtool table 1 on port 1: module tests - table sharing - overflow v6
#        check_table: ethtool does not contain 'port 30001, vxlan-gpe'
# Tunnel information for eni283np2:
#   UDP port table 0: 
#     Size: 4
#     Types: vxlan
#     Entries (3):
#         port 10000, vxlan
#         port 10004, vxlan
#         port 10003, vxlan
#   UDP port table 1: 
#     Size: 4
#     Types: geneve, vxlan-gpe
#     Entries (3):
#         port 20000, geneve
#         port 20004, geneve
#         port 20003, geneve
# ERROR: ethtool table 1 on port 1: module tests - table sharing - overflow v6
#        check_table: ethtool does not contain 'port 30002, vxlan-gpe'
# Tunnel information for eni283np2:
#   UDP port table 0: 
#     Size: 4
#     Types: vxlan
#     Entries (3):
#         port 10000, vxlan
#         port 10004, vxlan
#         port 10003, vxlan
#   UDP port table 1: 
#     Size: 4
#     Types: geneve, vxlan-gpe
#     Entries (2):
#         port 20000, geneve
#         port 20003, geneve
# Error: VXLAN GPE does not support this combination of attributes.
# Cannot find device "vxlanG0"
# ERROR: ethtool table 1 on port 0: sync all - table sharing - share
#        check_table: ethtool does not contain 'port 30001, vxlan-gpe'
# Tunnel information for eni283np1:
#   UDP port table 0: 
#     Size: 4
#     Types: vxlan
#     Entries (3):
#         port 10000, vxlan
#         port 10004, vxlan
#         port 10003, vxlan
#   UDP port table 1: 
#     Size: 4
#     Types: geneve, vxlan-gpe
#     Entries (3):
#         port 20000, geneve
#         port 20004, geneve
#         port 20003, geneve
# Error: VXLAN GPE does not support this combination of attributes.
# Cannot find device "vxlanG1"
# ERROR: ethtool table 1 on port 0: sync all - table sharing - overflow
#        check_table: ethtool does not contain 'port 30001, vxlan-gpe'
# Tunnel information for eni283np1:
#   UDP port table 0: 
#     Size: 4
#     Types: vxlan
#     Entries (3):
#         port 10000, vxlan
#         port 10004, vxlan
#         port 10003, vxlan
#   UDP port table 1: 
#     Size: 4
#     Types: geneve, vxlan-gpe
#     Entries (3):
#         port 20000, geneve
#         port 20004, geneve
#         port 20003, geneve
# Error: VXLAN GPE does not support this combination of attributes.
# Cannot find device "vxlanG2"
# ERROR: ethtool table 1 on port 0: sync all - table sharing - overflow v6
#        check_table: ethtool does not contain 'port 30001, vxlan-gpe'
# Tunnel information for eni283np1:
#   UDP port table 0: 
#     Size: 4
#     Types: vxlan
#     Entries (3):
#         port 10000, vxlan
#         port 10004, vxlan
#         port 10003, vxlan
#   UDP port table 1: 
#     Size: 4
#     Types: geneve, vxlan-gpe
#     Entries (3):
#         port 20000, geneve
#         port 20004, geneve
#         port 20003, geneve
# ERROR: ethtool table 1 on port 0: sync all - table sharing - overflow v6
#        check_table: ethtool does not contain 'port 30002, vxlan-gpe'
# Tunnel information for eni283np1:
#   UDP port table 0: 
#     Size: 4
#     Types: vxlan
#     Entries (3):
#         port 10000, vxlan
#         port 10004, vxlan
#         port 10003, vxlan
#   UDP port table 1: 
#     Size: 4
#     Types: geneve, vxlan-gpe
#     Entries (2):
#         port 20000, geneve
#         port 20003, geneve
# Error: VXLAN GPE does not support this combination of attributes.
# Cannot find device "vxlanG0"
# ERROR: ethtool table 1 on port 1: sync all - table sharing - share
#        check_table: ethtool does not contain 'port 30001, vxlan-gpe'
# Tunnel information for eni283np2:
#   UDP port table 0: 
#     Size: 4
#     Types: vxlan
#     Entries (3):
#         port 10000, vxlan
#         port 10004, vxlan
#         port 10003, vxlan
#   UDP port table 1: 
#     Size: 4
#     Types: geneve, vxlan-gpe
#     Entries (3):
#         port 20000, geneve
#         port 20004, geneve
#         port 20003, geneve
# Error: VXLAN GPE does not support this combination of attributes.
# Cannot find device "vxlanG1"
# ERROR: ethtool table 1 on port 1: sync all - table sharing - overflow
#        check_table: ethtool does not contain 'port 30001, vxlan-gpe'
# Tunnel information for eni283np2:
#   UDP port table 0: 
#     Size: 4
#     Types: vxlan
#     Entries (3):
#         port 10000, vxlan
#         port 10004, vxlan
#         port 10003, vxlan
#   UDP port table 1: 
#     Size: 4
#     Types: geneve, vxlan-gpe
#     Entries (3):
#         port 20000, geneve
#         port 20004, geneve
#         port 20003, geneve
# Error: VXLAN GPE does not support this combination of attributes.
# Cannot find device "vxlanG2"
# ERROR: ethtool table 1 on port 1: sync all - table sharing - overflow v6
#        check_table: ethtool does not contain 'port 30001, vxlan-gpe'
# Tunnel information for eni283np2:
#   UDP port table 0: 
#     Size: 4
#     Types: vxlan
#     Entries (3):
#         port 10000, vxlan
#         port 10004, vxlan
#         port 10003, vxlan
#   UDP port table 1: 
#     Size: 4
#     Types: geneve, vxlan-gpe
#     Entries (3):
#         port 20000, geneve
#         port 20004, geneve
#         port 20003, geneve
# ERROR: ethtool table 1 on port 1: sync all - table sharing - overflow v6
#        check_table: ethtool does not contain 'port 30002, vxlan-gpe'
# Tunnel information for eni283np2:
#   UDP port table 0: 
#     Size: 4
#     Types: vxlan
#     Entries (3):
#         port 10000, vxlan
#         port 10004, vxlan
#         port 10003, vxlan
#   UDP port table 1: 
#     Size: 4
#     Types: geneve, vxlan-gpe
#     Entries (2):
#         port 20000, geneve
#         port 20003, geneve
# Actual changes:
# rx-lro: off [not requested]
# rx-udp_tunnel-port-offload: off
# Actual changes:
# rx-lro: on [not requested]
# rx-udp_tunnel-port-offload: off
# Actual changes:
# rx-lro: off [not requested]
# rx-udp_tunnel-port-offload: on
# Actual changes:
# rx-lro: off [not requested]
# rx-udp_tunnel-port-offload: off
# Actual changes:
# rx-lro: on [not requested]
# rx-udp_tunnel-port-offload: off
# Actual changes:
# rx-lro: off [not requested]
# rx-udp_tunnel-port-offload: on
# Actual changes:
# rx-lro: off [not requested]
# rx-udp_tunnel-port-offload: off
# Actual changes:
# rx-lro: off [not requested]
# rx-udp_tunnel-port-offload: off
# FAILED 16/449 checks
not ok 1 selftests: drivers/net/netdevsim: udp_tunnel_nic.sh # exit=1
make[1]: Leaving directory '/home/virtme/testing-13/tools/testing/selftests/drivers/net/netdevsim'
make: Leaving directory '/home/virtme/testing-13/tools/testing/selftests'
xx__-> echo $?
0
xx__->